F451RL / F453RL – Brick Liner Installation / Removal
⚠
WARNING:
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this appliance may result in property damage or personal injury.
F451RL
: [1] Back Liner, [2] Side Liners
F453RL
: [1] Back Liner only
1.
Remove [2] DT Screws. Remove Grate from firebox.
2.
Tilt back liner back slightly and enter firebox with one top
corner first.
3.
Carefully move back liner past pilot area.
4.
Back Liner is held in place by angle in top of firebox.
F451RLT / RLH:
5.
Place Side Liners into firebox.
6
. Side Liners are held in place by retainer clips-
See
Next
Page.
GRATE
21
Summary of Contents for Kingsman FDV451LP
