R-Co Kingsman FDV451LP, Installation Instructions Manual

Page: 19 / 73

F451SD / MQ453SD -Side Door Kits-
Kit contains: [1] Pair of Side Door Panels with safety screens, [4] DT Screws.
⚠
WARNING: Wait until unit is COMPLETELY cool before touching glass or attempting to install or remove Side Panel.
1. Attach Side Door Panels using DT Screws provided.
2. Using DT Screws, adjust position of Side Door Panels
(
1/16” to 1/8” gap along front edge is optimal).
3. Move adjustable screws until face of Side Door Panels
are
flush with appliance (5/16” wrench and Phillips
screwdriver required).
IMPORTANT NOTES:

Cotton gloves must be worn to protect the finish during installation and handling.

All fingerprints must be cleaned off with a soft cloth prior to burning the unit or they will be permanent.

Stainless steel may discolor during normal operation. This is normal and should not be considered a defect.

Be sure to remove plastic protective film from stainless steel and clean residue with a damp cloth.
HINGE MOUNT LOCATIONS HINGES
ADJUSTABLE
SCREWS
MAGNETS
1/16” - 1/8” Gap
SAFETY SCREEN BARRIER
19