DUCOT – Heavy Attack 2020
Rural Fire Brigades Association Queensland
Revision 1.0, 11/2020 Page 55 of 132
13.2.4 Pump Control Panel Internal
Inside the Pump Control Panel, there are relays, circuit breakers, voltage reducers and a low fuel
module.
Figure 67: Pump Control Panel Access
Item
Item Name
1
Pump Control Panel Electrical Panel
2
Panel Bolts
Table 28: Pump Control Panel Access
To gain access to the Pump Control Panel electrical panel:
1. Isolate the power to the Pump Control Panel by turning the vehicle battery isolation switch
to the off position.
2. Isolate the Pump Set Batteries at the Circuit Breaker at the rear of the appliance.
3. Remove the bolts securing the panel.
4. Gently pull the panel forward to expose the internal area.
2
WARNING
Isolate the power supply to the Pump Control Panel before accessing the internal areas. Failure
to do so can cause electrocution injuries.
1