
DUCOT – Heavy Attack 2020
Rural Fire Brigades Association Queensland
Revision 1.0, 11/2020 Page 41 of 132
13.1.2 Bull Bar
For servicing purposes, the vehicle cabin tilts to provide access to the engine bay. The Bull Bar
has a limit switch that prevents the OEM Power Cabin Tilt from operating. Lower the Bull Bar to
activate the limit switch and enable the OEM Power Cabin Tilt.
Figure 48: Bull Bar
Item
Item Name
1
Bull Bar Pin
2
Bull Bar Eye Bolts
3
Front Anchor Point
Table 17: Bull Bar
To lower the bull bar, follow these steps:
1.
Support the Front Anchor Point and Remove the Bull Bar Pin.
2.
Remove and safely store the Front Anchor Point.
3.
Reinstall the Bull Bar Pin
4.
Remove the 2 Bull Bar “Eye” Bolts.
5.
Support the weight of the bull bar and then remove the Bull Bar Pin.
6.
Control the descent of the bull bar to the fully lowered position.
7.
Follow the OEM Vehicle Manual for Cabin tilting procedures.
2
1
NOTE
A Cabin Tilt Safety Switch has been added to the OEM Cabin Tilt System. The cabin will not tilt
unless the Bull Bar has been lowered.
WARNING
Failure to support the weight of the bull bar and control its descent to the lowered position can
result in damage to the bull bar and/or crushing injuries.
WARNING
Secure all loose items in the cabin prior to tilting. Failure to do so can lead to vehicle or
equipment damage caused by unsecured items moving as the cabin tilts.
3