DUCOT – Heavy Attack 2020
Rural Fire Brigades Association Queensland
Revision 1.0, 11/2020 Page 54 of 132
Item
Item Name
Function
1
Pump Inlet
This switch selects the water source for the pump set.
2
Ladder Rack
This switch controls the ladder rack actuator.
3
Delivery 1 Pressure
Gauge
This gauge displays the operating pressure of Delivery 1.
4
Primer Button
Momentary button to operate the electric primer.
5
Delivery 2 Pressure
Gauge
This gauge displays the operating pressure of Delivery 2.
6
Delivery 3 – CAFS
Pressure Gauge
This gauge displays the operating pressure of Delivery 3 – CAFS.
7
Air Pressure Gauge
This gauge displays the air pressure generated by the compressor.
8
Compressor Switch
This switch controls the Air Compressor for Air Lines or CAFS operation.
9
Compressor Over
Temperature Light
Warning light to alert the operator if the Air Compressor is over-heating.
10
Tacho
Displays the Hatz motor RPM.
11
Hatz Ignition Switch
and Warning Panel
Controls the starting and stopping of the Hatz engine and displays
warnings to inform the operator of any abnormal conditions with the Hatz
engine.
12
Left and Right Work
Light Switches
These switches control the Left and Right Work Lights.
Vehicle park lights and ignition must be on to operate.
13
Rear Strobe Light
Isolation
Isolates the rear Red & Blue Strobes when the emergency lights are
active. Automatically resets when the siren controller is off.
14
Hatz Hand Throttle
This knob is the electronic hand throttle that controls the Hatz engine
RPM.
15
Low Fuel Warning Light
Warning Light illuminates when the vehicle fuel tank is below ¼ capacity,
indicating that there is approximately 50 litres of fuel remaining.
16
Hour Meter
Displays the total number of hours the Hatz engine has been operating.
17
Mast Light Switch
This switch controls the two LED lights on the light mast. Requires
vehicle park lights, ignition and pump ignition to operate.
18
64 QRT Display
Displays the current setting for the Wet/Dry mixture for CAFS for the 64
QRT Delivery 3.
19
64 QRT Air Switch
This switch controls the air supply to the 64 QRT Delivery 3.
20
64 QRT Mixture Switch
This switch controls the Wet/Dry mixture to the 64 QRT Delivery 3.
21
Hose Reel Air Switch
This switch controls the air supply to the NS Hose Reel.
22
Hose Reel Display
Displays the current setting for the Wet/Dry mixture for the CAFS.
23
Hose Reel Mixture
Switch
This switch controls the Wet/Dry mixture to the NS Hose Reel.
24
Scene Lights Switch
This switch controls the Pump Panel Lights, including Gauge
Backlighting. Requires vehicle park lights and pump ignition to operate.
25
Rear Work Lights
Switch
This switch controls the rear-facing work lights. Requires vehicle park
lights, ignition and pump ignition to operate.
26
Buzzer Mute Button
A momentary button to mute the warning buzzer.
27
Warning Buzzer
The buzzer will sound for Low Fuel or Low Water.
28
Compound Gauge
Gauge providing information about the Pump Inlet operating pressure.
29
Low-Pressure Pump
Switch
This switch controls the Low-Pressure Pump. Requires pump ignition to
operate.
30
Low-Pressure Pump
Gauge
Low-Pressure Pump outlet operating pressure.
31
Foam Valve
Controls Foam Induction.
32
Foam Proportioner
Aquafoam FP135 controls the percentage of foam in the mixture.
Table 27: Pump Control Panel
