manualshive.com logo in svg

Quidway V100R006C00, Configuration Manual, Page: 7 / 91

Share
Download
Quidway V100R006C00 Configuration Manual Download Page 7

4.4.1 Clearing DNS Entries..............................................................................................................................50
4.4.2 Monitoring Network Operation Status of DNS.......................................................................................51
4.4.3 Debugging DNS......................................................................................................................................51

4.5 Configuration Examples...................................................................................................................................52

4.5.1 Example for Configuring DNS................................................................................................................52

5 Basic Configurations of IPv6.....................................................................................................56

5.1 Introduction to IPv6..........................................................................................................................................57
5.2 IPv6 Features Supported by the S2700.............................................................................................................57
5.3 Configuring an IPv6 Address for an Interface..................................................................................................59

5.3.1 Establishing the Configuration Task.......................................................................................................59
5.3.2 Enabling IPv6 Packet Forwarding Capability.........................................................................................60
5.3.3 Configuring an IPv6 Link-Local Address for an Interface......................................................................60
5.3.4 Configuring an IPv6 Global Unicast Address for an Interface................................................................61
5.3.5 Checking the Configuration.....................................................................................................................62

5.4 Configuring IPv6 Neighbor Discovery.............................................................................................................62

5.4.1 Establishing the Configuration Task.......................................................................................................62
5.4.2 Configuring Static Neighbors..................................................................................................................63
5.4.3 Enabling RA Message Advertising.........................................................................................................63
5.4.4 Setting the Interval for Advertising RA Messages..................................................................................64
5.4.5 Enabling Stateful Auto Configuration.....................................................................................................65
5.4.6 Configuring the Address Prefixes to Be Advertised...............................................................................65
5.4.7 Configuring Other Information to Be Advertised...................................................................................66
5.4.8 Checking the Configuration.....................................................................................................................67

5.5 Maintaining IPv6..............................................................................................................................................68

5.5.1 Clearing IPv6 Statistics...........................................................................................................................68
5.5.2 Monitoring the Running Status of IPv6...................................................................................................69
5.5.3 Debugging IPv6.......................................................................................................................................69

5.6 Configuration Examples...................................................................................................................................70

5.6.1 Example for Setting an IPv6 Address for an Interface............................................................................70

6 IPv6 DNS Configuration............................................................................................................74

6.1 Introduction to IPv6 DNS.................................................................................................................................75
6.2 IPv6 DNS Supported by the S2700..................................................................................................................75
6.3 Configuring IPv6 DNS.....................................................................................................................................75

6.3.1 Establishing the Configuration Task.......................................................................................................75
6.3.2 Configuring a Static IPv6 DNS Entry.....................................................................................................76
6.3.3 Configuring the Dynamic IPv6 DNS Services........................................................................................76
6.3.4 Checking the Configuration.....................................................................................................................77

6.4 Maintaining IPv6 DNS.....................................................................................................................................78

6.4.1 Clearing IPv6 DNS Entries......................................................................................................................78
6.4.2 Monitoring Network Operation Status of IPv6 DNS..............................................................................79

6.5 Configuration Examples...................................................................................................................................79

Quidway S2700 Series Ethernet Switches
Configuration Guide - IP Service

Contents

Issue 01 (2011-07-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

vi

Summary of Contents for V100R006C00




























































































Reviews:

No comments