Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
interface vlanif
vlan-id
The VLANIF interface view is displayed.
Step 3
Run:
ipv6 enable
You can enable the IPv6 capability.
Step 4
Run:
undo ipv6 nd ra halt
The function of advertising RA messages is enabled.
----End
5.4.4 Setting the Interval for Advertising RA Messages
The device periodically sends router advertisement messages containing information such as
prefixes and flag bits.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
interface vlanif
vlan-id
The VLANIF interface view is displayed.
Step 3
Run:
ipv6 enable
You can enable the IPv6 capability.
Step 4
Run:
ipv6 nd ra
{
max-interval
maximum-interval
|
min-interval
minimum-interval
}
The interval for advertising RA messages is configured.
By default, the maximum interval is 600 seconds and the minimum interval is 200 seconds.
The maximum interval can not be shorter than the minimum interval.
When the maximum interval is less than 9 seconds, the minimum interval is set to the same value
as the maximum interval.
----End
Quidway S2700 Series Ethernet Switches
Configuration Guide - IP Service
5 Basic Configurations of IPv6
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64