Procedure
l
Run the
display ipv6 host
command to check the static IPv6 DNS table.
l
Run the
display dns server
command to check the configuration of the DNS server.
l
Run the
display dns domain
command to check the configuration of the suffix list of the
domain name.
l
Run the
display dns ipv6 dynamic-host
command to check the cache of the dynamic
domain name.
----End
Example
Run the
display ipv6 host
command. If the static IPv6 DNS entries, including the host name
and the IPv6 address, are displayed, it means that the configuration succeeds. For example:
<Quidway>
display ipv6 host
Host Age Flags IPv6Address (es)
RTB 0 static 20::1
RTA 0 static 20::2
Run the
display dns server
command. If the IPv6 addresses of all DNS servers are displayed,
it means that the configuration succeeds. For example:
<Quidway>
display dns server
IPv4 Dns Servers :
Domain-server IpAddress
1 169.254.65.125
IPv6 Dns Servers:
Domain-server Ipv6Address (Interface Name)
1 3001::2
2 FE80::2 GigabitEthernet6/0/0
Run the
display dns domain
command. If the suffixes of the domain names are displayed, it
means that the configuration succeeds. For example:
<Quidway>
display dns domain
No Domain-name
1
com
2 net
Run the
display dns ipv6 dynamic-host
command. If information about the cache of the
dynamic domain name is displayed, it means that the configuration succeeds. For example:
<Quidway>
display dns ipv6 dynamic-host
No Domain-name Ipv6address TTL
1 huawei6 3001::2 6
6.4 Maintaining IPv6 DNS
This section describes how to maintain the IPv6 DNS. Detailed operations include deleting IPv6
DNS entries and monitoring IPv6 DNS operation.
6.4.1 Clearing IPv6 DNS Entries
This section describes IPv6 DNS entry clearance through the reset command.
Quidway S2700 Series Ethernet Switches
Configuration Guide - IP Service
6 IPv6 DNS Configuration
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
78