![background image](http://html1.mh-extra.com/html/quicktec/quicktherm-hf/quicktherm-hf_operating-and-installation-instructions_3680421016.webp)
16
Change installation settings
Caution:
These settings should only be carried out by the installer as they may affect the safety and function of the heating system
H
INSTALLER
SETTINGS
Customise the controller according application needs (by installer only)
default settings
( ) = value range
0 Code
Enter Code (= 7) in order to access the menus. It is valid for 1 Hour
1 Application
This controller is suitable for the heating system mentioned on right column. It can be selected if a
remote sensor has to be used.
ROOM/NO see 1
10
Set temperature
to read
Show set temperature instead of room temperature
NO
11
Adjust
Temperature
Adjust temperature to personal needs
0.0
(-5,0 ... +5,0)
13 Backlight
Continuously OFF or temporarily illuminates after key press. In case of using a remote sensor,
the backlight can be set to continuous on.
SHORT (SHORT,
OFF)
14 Language
Select preferred operating language
15 Info
Displays Controller-type and -version.
16
Reset user
settings only
Only USER SETTINGS will be set to factory settings. The energy counter will not be re-set;
to do this see H9).
NO
Summary of Contents for QuickTherm HF
Page 51: ...51...