22
The QuickTherm HF Room Thermostat Smart needs a remote temperature sensor. This sensor should be mounted in such a way that the
temperature which has to be controlled, can be measured correctly. Lay sensor inside a protective tube (simplifies replacement). The sensor
lead can be extended up to 50 m by using a cable and connections suitable for 230V. Avoid laying sensor cable alongside power cables, for
example inside a conduit.
Connecting the remote sensor
Caution!
The sensor is at mains voltage.
6. Technical Data
Order Type
QuickTherm HF Room Thermostat Smart
Supply voltage
230 V AC 50 HZ (207…253 V)
Temperature setting range
10°C to 40°C; in 0,5 °C steps
Temperature resolution
0,1 °C steps
Output
Relay NO contact
Switching current
10mA... 16(4)A AC*; 230 V~
Output signal
PWM (Pulse Width modulation) or ON/OFF
PWM cycle time
adjustable
Hysteresis
adjustable (ON/OFF only)
Minimum programmable time
10 Min
Power consumption
~ 1,2 W
Accuracy of clock
< 4 min / year
Power reserve
~ 10 years
Summary of Contents for QuickTherm HF
Page 51: ...51...
