06
In order to measure the room temperature, instead of the internal sensor an external one can be used.
Remote or internal sensor selection can be made via menu item H1.
Lay sensor inside a protective tube (simplifies replacement). The sensor lead can be extended up to 50 m by using a cable and connections
suitable for 230 V. Avoid laying sensor cable alongside power cables, for example inside a conduit.
Connecting the remote sensor
Caution!
The sensor is at mains voltage.
6. Technical Data
Order Type
QuickTherm HF Room Thermostat Smart
Supply voltage
230 V AC 50 HZ (195…253 V)
Temperature setting range
5 °C ... 30 °C; in 0,5 °C steps
Temperature resolution
0,1 °C steps
Output
Relay NO contact
Switching current
10mA ... 10 (4) A, 230 V~
Output signal
PWM (Pulse Width modulation) or ON/OFF
PWM cycle time
adjustable
Hysteresis
adjustable (ON/OFF only)
Minimum programmable time
10 Min
Power consumption
~ 1,2 W
Accuracy of clock
< 4 min / year
Power reserve
~ 10 years
Summary of Contents for QuickTherm HF
Page 51: ...51...
