QUICK2025 manual operation
6.2 Install the LCD
1
．
Take out the LCD carefully from the package, back out the base of the LCD and then unscrew the four fixed
screws.
2
．
Install the fixing board to the LCD and screw down the fixed screws.
3
．
Screw down the fixed knob in the left and lock screw in the right of the fixing board and install the fixing
board on the bracket and then screw down the knob and screw.
4
．
Connect the plug of the RPC to the socket at the bottom of the braket.
5
．
If user wants to adjust the height of the LCD , please unscrew the fixed knob and lock screw to adjust the
LCD to suitable height and then screw down the fixed knob and lock screw.
Fixed screw
Lock screw
LCD
Fixed knob
6.3
Connect the Equipment
* Check the using power supply whether is the same with the rating voltage value in the specification
scutcheon.
* Check the switches of the entire units are turn off or not.
* Connect the power cord to the power socket.
* Connect the RS-232 cord to the RS-232 socket in PC if you use the BGA software.
* Connect the video line of the external monitor to the VIDEO-OUT socket.
* Connect the K type sensors (optional) to the external sensor’s socket in the front.
Video input
Video output
Interface RS-232
Power cord
Fuse socket
Page 6
