QUICK2025 manual operation
●
Aligning arm is controlled by the “CAM-CON”
key. Pressing “CAM-CON” key, when the aligning
arm is in side, it will move automatically from inner
to outer and stop in one line with the top heater, and
when the aligning arm is outside, it will do the
opposite action to the initial state. But the aligning
arm does not act when pressing it until the top
heater up to certain height.
●
Aligning arm is outside when the camera in using
state and the light of the camera is adjustable. User
can get a clear image by lighting, focusing and
zooming and the aligning operation is easy and
convenient by micro adjusting.
Aligning
arm inside
Aligning
arm outside
* Nozzle Instruction
●
The nozzle will act during the process of
placing and sucking the chip, SUCKER
（↑）
and SUCKER
（↓）
keys control the nozzle
moving upwards and downwards.
●
Press “SUCK” key to the state of the chip
sucking and the nozzle will suck the chip
automatically.
●
Press “PASTE” key to the state of the chip
pasting and the nozzle will paste the chip
automatically.
●
Element adjusting knob is in the middle. Turn
it when optics alignment to make the BGA
sucked by the nozzle turning until the
stannum ballpoint in the BGA
is
superposable
with the cuprum point in the
PCB. During the process, up and down
micro-adjusting knobs and left and right
micro-adjusting knobs work in together for
precise alignment.
Aligning knob
Heating arm
Nozzle
Page 12
