QUICK2025 manual operation
in the range of 0~300s.
TIR
、
KTB
TIR
：
the setting heating temperature of the bottom heating tubes
；
KTB
：
Real-time temperature of bottom sirocco heating, correspond to TB
底部热风实际温度，相当于
TB
KIR
、
IRT
KIR
：
Real-time temperature of bottom infrared heating
IRT
：
Real-time detecting temperature of the infrared sensor
TB
、
TC
TB
：
Real-time temperature of bottom infrared heating
TC
：
Real-time temperature of top heating
TOS
It is used for choosing the system’s sensor type between IR and KT1-KT5. Besides system’s non-touch infrared
sensor (IR), users can also choose K type sensor used for measuring temperature. The signal of chosen sensor
will be displayed and used for process controlling. Use the
UP
, DOWN, RIGHT, LEFT, RIGHT, SET and
SAVE key to set the values of TEL when modifying the parameters.
Password
It is used for setting password. It is designed for preventing the equipment unnecessary or non-authorized
change. When it is set to “000”, the password protecting is useless. The password is used for all flows and it can
be useful and useless in each flow. The system requires inputting correct password before any change.
Using of password refer to A item.
9
、
Operating Technics Instruction
Note: Top and Bottom Heater will be very hot during working, so please don’ touch the hot surface of
the parts.
9.1 Soldering Technics (System’s power supply is on)
1
．
Turn on power switch of each part.
2
．
Move PCB Fixture bracket with PCB above the Bottom heater and make the soldered component on the
Page 17
