QUICK2025 manual operation
C
、
Parameter Setting of the DATA Interface
Press “SET” key and select the “DATA”, and then press “SET” again to setting the parameters. Now the cursor
is on the selecting item and the method of the setting the parameters as the example one. “DATA” interface will
show the ten processes in the host machine. Of course, user can modify it by oneself as needing. The ten
processes all have password protection and authority setting to ensure the reliable technics
Note: It must be in the DATA interface to cancel the calibrating. Setting the “CAL” parameter as “OFF”
to cancel the calibrating quotiety back to initial state.
C-1
．
Modify Parameter of working flow
1
．
If it is necessary to modify parameters of some processes, first you must select the certain process and then
modify its parameters (modify method as above).
2
．
The modification of parameter must accord with the following technics graph.
Tb
TB2
TB1
TC
Tir
TS3
TS2
℃
TS1
表示
Tb
表示
TC
T1
T2
TL
T3
Tb=T0
Page 15
