Quest Engineering MPS 3, Operation Manual, Page: 94 / 268

MPS 3 System – Graphical User Interface (GUI) Overview
21
Delivery Pressure
Chart
The Delivery Pressure Chart (21) is a real-time chart
showing 16 second dynamic delivery pressure
history. Only displayed in Chart view
22 Stopwatch Timer
The Stopwatch Timer (22) counts up every second
when the timer is started and halts when the timer is
stopped
23
VTBD / TTBD
Counter
The VTBD and TTBD (23) counters count down the
volume or time during delivery. Flow is automatically
stopped when the counter reaches 0.
24 Flow Knob The Flow Knob (24) is used to adjust the flow rate.
25
Stop Flow
Auto-Start
The Stop Flow (25) button, displayed only when flow
is greater than zero, may be used to immediately
stop flow.
The Auto-Start button, displayed only when flow is
zero, may be used to ramp to the target pressure
and then activate Auto Mode by holding down Auto-
Start button for 3 seconds.
26 Set Knob The Set Knob (26) is used to set parameters.
27
Flow Increment &
Decrement
Buttons
The Flow Increment and Decrement (27) button
may be used to adjust the flow rate. Tap the button
for slow adjustments or hold down the button for
rapid adjustments.
# Icon Name Description
4