Chapter 3 Detailed Operating Instructions
31
3.
If data has not yet been recorded, skip to step 5.
If data has been recorded, press the UP ARROW button. The
IAQ Monitor will scroll to the next screen, which shows the
results of the recorded data. This screen will be in the
following format:
N H2S 0.5 ppm
Min 0.3 ppm
Avg 0.4 ppm
Max 0.5 ppm
There will be a screen as shown for each active channel.
If using survey mode, the data will be the last (most recent)
sample recorded. If using data logging mode, that data will be
the overall statistics. If Brief Statistics Mode has been
selected, only average readings will be displayed.
NOTE:
These screens will be skipped if data has not been
recorded.
4. Continue to press the UP ARROW button to scroll through the
results for each test in memory.
5. Press the UP ARROW button. The IAQ Monitor will scroll to
the next screen, which shows the recording status, the number
of tests in memory, elapsed time and the amount of memory
remaining. This screen is displayed in the following format:
Not Recording
Test Number: 1
ET: 00Dys 00:07:12
Mem 09Dys 22:48:00
6. Press the UP ARROW button. The IAQ Monitor will scroll to
the next screen, which shows the recording status, battery
status, present date and time. This screen is displayed in the
following format:
N Date & Time
04 JAN 2002
03:30:44
Battery: 5.5V (OK)