Chapter 3 Detailed Operating Instructions
36
Secure Mode
The Secure Mode feature is used to prevent tampering during
unattended recording.
If Secure Mode is enabled, all functions will be locked out until
Secure Mode is disabled.
Secure Mode is enabled and disabled by entering the correct 4-digit
Secure Code, in the correct sequence. The Secure Code is
selected when programming the IAQ Monitor with QuestSuite
Professional. The default Secure Code is 1231.
To record using the Secure Mode:
1. Turn the IAQ Monitor on. It will display the Main Screen.
2. Press the RECORD button and the following screen will be
displayed:
Enter
Secure
Mode?
Press RECORD For Yes
Press
t
/
u
For No
ON/OFF Aborts
3. Press the RECORD button and the following screen will be
displayed:
Enter Code : 0 - - -
t
/
u
Selects Choices
RECORD Selects
Press ON/OFF To Exit
4.
Use the Up and down arrow buttons to select the value of the
first digit. Press RECORD to select and move to the next digit
until all four digits are entered. Once the correct Secure Code is
entered, the IAQ Monitor will begin recording and display the
following screen to indicate that Secure Mode is been enabled:
Recording
In Secure Mode
Any Keypress to Exit
