Compact RDMS
TM
Telemetry Receiver
18
Quasonix, Inc.
Mnemonic
Name
Description
Option (s)
Required
Basic or
Advanced
Command
Mode
Restriction
TO F
Tape Output
Frequency
Sets the carrier frequency of
the pre-detection complex
Tape Output
Examples:
TO F 0 Sets the Tape
Output Frequency to Off
(carrier frequency = 0 MHz)
TO F 1 Sets the Tape
Output Frequency to a
specific frequency number
Value range is 0.000 to
20.000 MHz
37
Advanced
Command
PCM/FM
TO T
Tape Output
Source
Sets the test output to a
Tape source;
Enables or Disables the pre-
detection complex baseband
as the tape output source
When enabled (T=1), pre-
detection complex baseband
is selected as the source of
data to send on I and Q
analog outputs
When disabled (T=0), the I
and Q analog outputs
(frequency/phase
information) are restored to
their normal defaults which
vary by mode
Examples:
TO T 0 Sets the Tape
Output Source to disabled
TO T 1 Sets the Tape
Output Source to enabled
37
Advanced
Command
PCM/FM
VE Version
Report the current Firmware
(software) version
information for the receiver
Standard Basic
None