DLT VS80 Product Specification
001597-01 Rev. A09
May 2004
3-3
Clean/Media LED (amber)
Blinking
A hard read/write error has occurred that is probably
recoverable. Clean the drive.
LED is off after
completing a cleaning cycle with a DTL1 cleaning
cartridge or after loading a properly formatted data
cartridge. Cycling power to the drive also turns off the
LED.
Off
Cleaning is not required
All three LEDs
On
POST is starting
Blinking
Firmware upgrade is in progress
(Note that the LED
sequence during an upgrade must be the same whether
the upgrade is done via SCSI or via tape.)
Power LED (green – External Drive Only)
On
The drive is on
Off
The drive is off
Table 3-2.
LED States and Functions
(Continued)
LED
State
Description
Summary of Contents for ValueLoader DLT VS80
