001597-01 Rev. A09
May 2004
2-1
C
HAPTER
2
Chapter 2
Physical Specification
This chapter presents the physical characteristics of the DLT VS80 subsystem: internal and external
size, electrical requirements, communication interface, and mean time between failures (MTBF). This
chapter also shows mounting hole locations on the internal unit, giving dimensions from both a bottom
and a side view
2.1
Physical Specification
This section describes the tape drive size, electrical requirements, communication interface, and
MTBF.
Table 2-1
lists the size, weight, and orientation of internal and external units.
Table 2-1.
Physical Specifications
Unit
Parameter
Value
Internal
Height
43.82 mm (1.725 in.) with bezel
41.70 mm (1.625 in.) without bezel
Width
146.05 mm (5.750 in.) behind bezel
148.18 mm (5.834 in.) with bezel
Length
216.14 mm (8.509 in.) measured from back of front bezel
220.96 mm (8.699 in.) including the bezel
Weight
1.45 kg (3.2 lbs)
Shipping weight
2.08 kg (4.59 lbs) depending on configuration
Orientation
Horizontal, Vertical (2-sides)
External
Height
66.24 mm (2.608 in.)
Width
212.13 mm (8.352 in.)
Summary of Contents for ValueLoader DLT VS80
