Quantum ValueLoader DLT VS80, Product Specification

Page: 22 / 50

Chapter 2: Physical Specification
2-4 May 2004 001597-01 Rev. A09
2.2.2 Mounting Holes (Side View)
Figure 4-1 shows the mounting holes and dimensions as viewed from the side of the tape drive.
Figure 2-2. Mounting Holes and Dimensions (Side View)
N
OTES
: 1 Tape drive width and length are standard 5¼-inch form factor
measurements.
2 Dimensions are identical on the left and right sides.
3 Length dimensions are from the front of the base plate.
N
OTES
: 1 Tape drive width and length are standard 5¼-inch form factor
measurements.
2 Dimensions are identical on the left and right sides.
3 Length dimensions are from the front of the base plate.
>@
“
>“@
([FOXGLQJ0HGLD
%D\&RYHU
“
>“@
81&%7<3
“
>“@
“
>“@
“
>“@
,QFOXGLQJ0HGLD
%D\&RYHU
“
>“@
“
>“@
“
>“@
“
>“@