![background image](http://html1.mh-extra.com/html/quantum/qxs-448/qxs-448_drive-rackmount-install-manual_3936363021.webp)
Install and Secure the Chassis
QXS 48-Drive Rackmount Install Guide
21
Install and Secure the Chassis
1. Carefully lift/align the chassis and slide it into the rack. Ensure that the chassis is level.
Caution:
h
Chassis must be level (parallel to floor).
h
Rails might bend if the chassis is not level when inserted.
h
Replace the rail if it becomes deformed as a result of inserting the chassis in an unlevel position
during installation.
Note:
The top of the chassis might have a protective film installed. Leave the protective film on the
chassis. If the protective film does not allow the chassis to be installed (clearance issue in rack),
remove the protective film and discard.
Figure 23:
Sliding chassis into rack
Orientation Key
1
2
1.
Chassis
2.
Rack space
2. Using a total of four #10-32 x 3/4 truss Phillips or #12-24 x 3/8 Phillips screws or appropriate metric (5 or
6 mm) panhead screws (two per ear), secure the mounting ears on the front of the chassis to the rack
face.