![background image](http://html1.mh-extra.com/html/quantum/qxs-448/qxs-448_drive-rackmount-install-manual_3936363012.webp)
Install Rails (Square, Round, Pre-tapped Hole-Racks)
QXS 48-Drive Rackmount Install Guide
12
5. Repeat steps 1–4 to secure the other side of the rail kit.
Round Hole-Rack Rail Installation
Complete steps 1–4 to install the rails.
1. For round-hole racks, install clip nuts in the front rack holes where chassis ears will be attached.
a. Before rail installation, refer to
Figure 11 below
for location of screws and clip nuts for the front
of the chassis.
Figure 11:
Screws and Clip Nuts for Chassis Front
3
1
2
3
4
4
5
5
1.
Left Rail
2.
Right Rail
3.
Round-Hole Rack
4.
Threaded Holes on Rail (for installing rails into rack)
5.
Clip Nuts Installed (for chassis screws)
b. Before rail installation, refer to
Figure 12 below
for location of screws and clip nuts for the rear of
the chassis.
Figure 12:
Screws and Clip Nuts for Chassis Rear
1
2
3
3
4
4