Install Rails (Square, Round, Pre-tapped Hole-Racks)
QXS 48-Drive Rackmount Install Guide
19
Figure 20:
Rail Attachment to Front of Rack (screws fastened to back of rack post)
1
2
1.
Right rail
2.
Left rail
3. Depending upon rack type, use two #10-32 x 3/4 truss Phillips screws or #12-24 x 3/8 Phillips screws or
appropriate metric (5 or 6 mm) pan head screws to attach the rear rail assembly to the rear of the rack.
See
Figure 21 below
.
Use one of the following Code C screws (part numbers):
l
01-00000264-00-01
l
01-00000267-00-01
l
01-00000269-00-01
l
01-00000190
Note:
While tightening the screws, push the rails outward to maximize the opening width.
Figure 21:
Rail Attachment to Rear of Rack (pre-tapped hole in rack)
1
2
1
2
1
2