![background image](http://html1.mh-extra.com/html/quantum/qxs-448/qxs-448_drive-rackmount-install-manual_3936363016.webp)
Install Rails (Square, Round, Pre-tapped Hole-Racks)
QXS 48-Drive Rackmount Install Guide
16
Note:
Callouts apply to both rails
1.
Left rail assembly
2.
Right rail assembly
3.
Installed depth
5. Repeat steps 1–4 to secure the other side of the rail kit.
Pre-tapped Hole-Rack Rail Installation
Complete steps 1–4 to install the rails.
1. For pre-tapped hole-racks, only screws are required to attach the rails to the rack.
a. Before rail installation, refer to
Figure 17 below
for location of screws and pre-tapped holes on
the front of the rack.
b. The rail slides in behind the pre-tapped section of the rack.
Figure 17:
Pre-tapped Holes to Mount Rails for Chassis Front
1
2
3
3
4
4
5
5
1.
Left Rail
2.
Right Rail
3.
Pre-tapped Hole-Rack
4.
Holes on Rail (for installing rail mounting screws to
rack)
5.
Holes to Secure Chassis to Rack