Next Steps
QXS 48-Drive Rackmount Install Guide
25
Figure 27:
Installing bezel
1
2
3
1.
Chassis bezel (includes EMI shield for drives)
2.
Ball stud on chassis ear (typical 4 places on chassis)
3.
Pocket opening (typical 2 places on bezel)
Note:
When the chassis is in operation, the bezel must be attached in order to provide EMI
protection for the drives.
3. Install any additional options as described in instructions provided with the options.
4. Connect chassis, power up the system, and connect hosts as described in the Setup Guide.
5. Upon successful completion of the hardware installation, use the storage system’s web-based
management interface to configure and provision the system.
6. See the
Quantum website
for additional information.