Quantum FC1202 User Manual Download Page 70

Page: 70 / 108

If the Autobaud feature is being used, it is not

necessary to set a baud rate.

Chapter 2 FC1202 Bridge Serial/Telnet User Interface
Perform Configuration

Quantum FC1202 User’s Guide

Ethernet
Configuration

In the

Configuration Menu

, choose

Ethernet Configuration

to set up the

Ethernet network. When this option is selected, the Ethernet

Configuration Menu

is displayed.

Current Ethernet settings are displayed, along with available Ethernet

configuration options.

Figure 35

is an illustration of the

Ethernet Configuration Menu

Figure 35 Ethernet
Configuration Menu

To view or change configuration settings:

Select a menu option

Make the configuration changes

Select

X) Return to previous menu

Select

A) Save Configuration

to record the changes.

Ethernet

Configuration Menu

options:

Note:

The asterisk (*) symbol indicates the current setting for the

baud rate.

Summary of Contents for FC1202













































































































Search results

Summary of Contents for FC1202

Reviews:

Related manuals for FC1202

Brands by name

Popular brands

Quantum FC1202, User Manual

Search results

Summary of Contents for FC1202

Reviews:

Related manuals for FC1202

Brands by name

Popular brands