Quantum FC1202, User Manual

Page: 63 / 108

Chapter 2 FC1202 Bridge Serial/Telnet User Interface
Serial User Interface (UI) Access
Quantum FC1202 User’s Guide 45
Table 11 Terminal
Settings
5
After completing the serial port configuration, select
OK
to start a
serial session.
6
After the serial session has started, press
Enter
several times to
initiate FC1202 communication and display the
Configuration Menu
.
Power up
Messages
2
When the FC1202 is powered-on, a series of messages is displayed on the
serial terminal or terminal emulation program.
Figure 29 is an example of these power-up messages.
BAUD Rate Autobaud, 9600, 19200, 38400, 57600, 115200
Data Bits 8
Stop Bit 1
Parity None
Flow Control None or XON/XOFF
Note:
Setting the baud rate to 115200 is recommended.