Quantum FC1202 User Manual Download Page 44

Page: 44 / 108

Chapter 1 FC1202 Description and Web Interface
FC1202 Web Interface

Quantum FC1202 User’s Guide

Fibre Channel Mapping Tasks

Configuration tasks for Fibre Channel mapping include:
•

Viewing and Changing Fibre Channel Host Information

•

Viewing and Changing Fibre Channel Map Information

Viewing and Changing Fibre Channel Host Information

This section is reserved for Quantum Customer Support only.

Viewing and Changing Fibre Channel Map Information

To view or change current Fibre Channel map information:

In the

Mapping Menu

screen, select the

Fibre Channel port

Select

Edit/View

in the Map section of the screen.

The

Fibre Channel Map

dialog box is displayed. Current map

information is shown at the top of the dialog box.

Enter the new settings and then select the appropriate action button.

Edit/View Map

View or change map information.

Delete Map

Deletes the current map

Note:

Indexed, Auto Assigned, and ACC maps cannot be deleted or

renamed.

Field

Description

Summary of Contents for FC1202













































































































Search results

Summary of Contents for FC1202

Reviews:

Related manuals for FC1202

Brands by name

Popular brands

Quantum FC1202, User Manual

Search results

Summary of Contents for FC1202

Reviews:

Related manuals for FC1202

Brands by name

Popular brands