Quantum FC1202 User Manual Download Page 80

Page: 80 / 108

Chapter 2 FC1202 Bridge Serial/Telnet User Interface
Perform Configuration

Quantum FC1202 User’s Guide

•

Edit Current Map

changes current map settings.

•

Edit Host List for Current Map

changes the host information for the

current map.

•

Display Device List

displays the device list.

•

Return to previous menu

, returns to previous menu.

• Command,

<Enter>

for next port/bus to scroll to the next SCSI bus,

press <

Enter>

Because each menu option includes a menu or sample screen display,

each menu option is discussed in the following separate sections.

Selecting the Current Map

In the Device Mapping Configuration Menu, choose

Select Current Map

select the current map for each port or bus.
When this option is selected, the

Select Current Map

screen is displayed.

The current map assignment is displayed at the top of the screen.

Figure 39

is an illustration of the Select Current Map screen for a Fibre

Channel port.

Summary of Contents for FC1202













































































































Search results

Summary of Contents for FC1202

Reviews:

Brands by name

Popular brands

Quantum FC1202, User Manual

Search results

Summary of Contents for FC1202

Reviews:

Brands by name

Popular brands