background image

Initial Configuration

29

DXi4000

To configure 

Email Reports

:

a

Make sure a valid outgoing e-mail server is specified on the 

Configuration 

> Notifications > Email > Server

 page.

b

(Optional) Specify any additional recipients to receive the reports on the 

Configuration > Notifications > Email > Email Reports > Recipients

 

page.

c

Make sure a weekly 

Email Reports

 schedule is configured on the 

Configuration > Scheduler

 page. Configure two weekly recurring events: 

one for 

Status

 reports and one for 

Configuration

 reports.

• Use the other 

Configuration Wizards

 on the 

Wizards

 menu to configure 

additional features of the DXi:

OST Wizard

 - Helps you configure the DXi to present its storage as one or 

more OST (OpenStorage) storage servers for use with a backup application.

Replication Wizard

 - Helps you configure the DXi to send replicated data to 

or receive replicated data from another DXi system.

Email Alerts Wizard

 - Helps you configure the DXi to automatically send 

notifications and reports to selected recipients.

Support Wizard

 - Helps you enable licensed features on the DXi, register 

your system with Quantum, and perform other tasks that will aid Quantum 

customer support in assisting you.

Note:

To learn more about using the 

Configuration Wizards

, refer to the 

Quantum DXi4000 User’s Guide

 (6-67092).

• To configure your backup application to begin performing backups to the new 

NAS share, refer to your backup application documentation.

• To learn more about operating the DXi4000, refer to the 

Quantum DXi4000 

User’s Guide

 (6-67092).

• To enable remote replication of the NAS share to another DXi™-Series system, 

refer to Chapter 6, “DXi4000 Replication” in the 

Quantum DXi4000 User’s 

Guide

.

• (DXi4601 only) To upgrade the storage capacity of the DXi4601, contact your 

Quantum sales representative. Raw storage capacity can be upgraded at any 

time in increments of 4 TB, up to a total of 12 TB. Storage capacity upgrades are 

enabled simply by adding a license key and rebooting the system.

Note:

After you obtain the storage capacity license, refer to the section 

“Adding a License Key” in the 

DXi4000 User’s Guide

 (6-67092) for 

instructions on completing the capacity upgrade.

Summary of Contents for DXi4520

































Reviews: