![background image](http://html1.mh-extra.com/html/quantum/dxi4520/dxi4520_installation-and-configuration-manual_3745155014.webp)
12
Initial Configuration
DXi4000 Installation and Configuration Guide
Accessing the DXi4000,
Remote Management
Console
To access the DXi4000 remote management console:
1
Turn on the DXi4000 system by pressing the power button located on the front of
each chassis (see
Figure 8
).
Note:
Wait for the system to boot before continuing with the procedure. This can
take up to 30 minutes.
Figure 8 Power Buttons
2
Using an Ethernet cable, connect the Ethernet port on the computer to Ethernet
port 2 on the back of the DXi4000. Ethernet port 2 is in the far left-hand Ethernet
port in the middle PCI slot (slot 2) as you face the back of the system (see
Figure 9
).
Figure 9 Ethernet Ports
Power button
The NMI button is recessed to prevent it
from being pressed accidently. Press only
when instructed by technical support
Front
ST
1
3
2
1
2
Gb
2
Gb
1
2
3
4
5
Service port (not
for customer use)
Not used
Back
Ethernet port 2
iDRAC port (not
for customer use)