24
Initial Configuration
DXi4000 Installation and Configuration Guide
Note:
This procedure assumes you are creating a NAS share in a Windows
environment. Refer to the
Quantum DXi4000 User’s Guide
(6-67092) for
additional NAS configuration information.
1
Log on to the DXi4000 remote management console:
a
On a computer on the same subnet as the DXi4000, enter the IP address of the
system in the
Address
box of a supported Web browser.
Use the IP address you specified when setting up the system.
The
Login
window displays (see
Figure 11
).
b
Select
Administrator
, type
password
for the password, and click
Login
.
If this is the first time you have logged on since completing the
Getting Started
wizard, then the
Configuration Wizards
page displays. Otherwise, the
Home
page displays.
2
Access the
NAS
wizard:
Note:
This procedure assumes you are joining the DXi4000 to a Windows
workgroup. If your site uses Active Directory instead of workgroups, refer
to the
Quantum DXi4000 User’s Guide
(6-67092) for information on joining
a Windows domain using Active Directory.
a
If the
Wizards
menu is not visible, click
Wizards
on the main menu.
b
On the
Wizards
menu, click
NAS.
The
About
page displays (see
Figure 19
).
Figure 19 NAS Wizard: About
3
Read the information about the wizard, and then click
Next
to continue.
The
Protocol
page displays (see
Figure 20
).
