4
Unpacking the DXi4000
DXi4000 Installation and Configuration Guide
Taking ESD Precautions
Some components within the DXi4000 system contain static-sensitive parts. To avoid
damaging these parts while performing installation procedures, always observe the
following precautions:
• Keep the DXi4000 system turned off during all installation procedures.
• Keep static-sensitive parts in their original shipping containers until ready for
installation.
• Do not place static-sensitive parts on a metal surface. Place them inside their
protective shipping bag or on an antistatic mat.
• Wear anti-static wrist bands when unpacking and handling the units, and avoid
touching connectors and other components.
Note:
Dry climates and cold-weather heating environments have lower relative
humidity and are more likely to produce static electricity.
Unpacking the DXi4000
By following these instructions, you help ensure that the system will continue to be
safeguarded after it arrives at the installation site.
Unpack and remove the following components from the packing materials (see
Figure 1
):
• DXi4000 chassis
• Front bezel with key
• (4) power cords, (2) U.S. and (2) International
• (2) Ethernet cables
• Left and right slide assemblies
• Product Information Guide
• Document kit includes:
• DXi4000 Installation and Configuration Instructions
• Quantum Products Regulatory Documentation CD
• User essentials document
• Registration card
• Terms and conditions
Caution:
Do NOT discard the packing materials after the system is unpacked. The
packaging materials must be used if the system is relocated.
