![background image](http://html1.mh-extra.com/html/quantum/dxi4520/dxi4520_installation-and-configuration-manual_3745155024.webp)
22
Initial Configuration
DXi4000 Installation and Configuration Guide
Figure 18 Installing the Front
Bezels
Creating a Typical
Backup Configuration
Before you can begin using the DXi4000 for backups, you must configure the system for
NAS or Symantec™ NetBackup OST. See the following sections for detailed instructions
for completing each type of configuration:
•
Installed System Licenses
on page 22
Refer to this section for information on installed system licenses.
•
OST Configuration
on page 23
See this section to configure the DXi4000 to use OST (OpenStorage) and Symantec
NetBackup to perform backups and Optimized Duplication.
•
NAS Configuration
on page 23
See this section to configure the DXi4000 to use NAS (network attached storage) for
backups.
Installed System Licenses
The following licenses are installed by default on the system:
• Deduplication License
• NAS connectivity License
• OST (Open Storage) License
• Replication License
DXi4000 bezel