![background image](http://html1.mh-extra.com/html/quantum/dlttape-dlt-4000/dlttape-dlt-4000_product-manual_3688580159.webp)
SCSI Commands
Quantum DLT 4000 Tape Drive
5-59
LOG SENSE Command (4Dh) (continued)
Bit
Byte
7
6
5
4
3
2
1
0
0 - 1
Parameter Code
2
DU
DS
TSD
ETC
TMC
Rsvd
LP
3
Parameter Length (04h)
4 - 7
(MSB)
Parameter Value
(LSB)
Figure 5–27 Log Parameters Format for Device Status LOG SENSE Page (Parameters
0000h, 0001h, or 0002h)
Table 5–30 Log Parameters for Device Status LOG SENSE Page Field Descriptions
Field Name
Description
Parameter Code
Parameter Codes 0000h through 0002h are supported.
Code
-
Description
0000h - Specifies device type. For sequential-type devices such as tape drives,
the value is always 00010000h.
0001h - Specifies device cleaning-related status. See Figure 5-28.
0002h - Specifies the number of “loads” over the lifetime of the tape drive.
DU
Disable Update. Always 0.
DS
Disable Save. Not supported. This bit always set to 1.
TSD
Target Save Disable. When = 0, indicates that the target provides a target-
defined method for saving log parameters. When = 1, indicates that either the
target does not provide a defined method for saving log parameters or that the
target-defined method has been disabled by the initiator.
Summary of Contents for DLTtape DLT 4000
