Quantum DLTtape DLT 4000, Product Manual

Page: 27 / 300

General Description and Specifications
Quantum DLT 4000 Tape Drive 1-3
1.2 PRODUCT FEATURES
The DLT 4000 tape drive offers the following product features:
•
20.0 GB Native, 40.0 GB Compressed Capacity (Formatted capacity
assuming a 2:1 data compression ratio. Note that actual compression ratio
depends on the type of data, SCSI bus limitations, and system
configuration.)
•
Superior Error Detection and Correction
•
Extensive Embedded Diagnostic/Self-Test Software
•
Tape-Loadable Firmware
1.3 PRODUCT SPECIFICATIONS
The following subsections contain full specifications for the Quantum DLT 4000
tape drive. Specifications for the DLTtape
 tape media cartridges are also
included.
1.3.1 Physical Specifications
The following table provides physical dimensions for the DLT 4000.
Table 1–1 DLT 4000 Physical Dimensions
Dimension Rackmount Tabletop
(Version 1)
Tabletop
(Version 2)
Height 3.25 in. (8.26 cm) without front
bezel; 3.40 in (8.64 cm) with front
bezel. 5.77 in.
(14.66 cm)
4.88 in.
(12.40 cm)
Width 5.70 in. (14.48 cm) behind front
bezel; 5.84 in (14.83 cm) with front
bezel. 9.25 in.
(23.50 cm)
9.06 in.
(23.01 cm)
Depth 9.00 in. (22.86 cm) measured from
back of front bezel; 9.60 in. (24.38
cm) including front bezel 13.08 in.
(33.22 cm)
12.60 in.
(32.00 cm)
Typical Weight: 6 lb., 7 oz (2.9 kg) (14 lb., 9 oz) 6.63 kg
Note: Mounting hole pattern for the bottom and sides of the drive is industry standard.