![background image](http://html1.mh-extra.com/html/quantum/dlttape-dlt-4000/dlttape-dlt-4000_product-manual_3688580101.webp)
Quantum DLT 4000 Tape Drive
5-1
Chapter 5
SCSI COMMANDS
This chapter describes the SCSI protocol features implemented in the DLT 4000 tape drive. Note that
the sections included in this chapter do not fully reiterate every ANSI SCSI message, option, and/or
command code specification; the sections do describe the supported commands, messages,
options, and error recovery procedures.
5.1
OVERVIEW OF COMMAND AND STATUS PROCESSING
The Quantum DLT 4000 tape drive supports the SCSI commands listed in Table
5-1. The subsection of this chapter that details each of the SCSI commands is
listed in the “Section” column.
Table 5-1 Supported SCSI Commands
Command
Operation Code
Section
ERASE
19h
5.3
INQUIRY
12h
5.4
LOAD UNLOAD
1Bh
5.5
LOCATE
2Bh
5.6
LOG SELECT
4Ch
5.7
LOG SENSE
4Dh
5.8
MODE SELECT (6 / 10)
15h / 55h
5.9
MODE SENSE (6 / 10))
1Ah / 5Ah
5.10
PREVENT ALLOW MEDIUM REMOVAL
1Eh
5.11
READ
08h
5.12
READ BLOCK LIMITS
05h
5.13
READ BUFFER
3Ch
5.14
READ POSITION
34h
5.15
Summary of Contents for DLTtape DLT 4000
