manualshive.com logo in svg

Quantum DLTtape DLT 4000, Product Manual

Looking for an Install Manual for your Quantum DLTtape DLT 4000? Look no further! Get ready to experience seamless setup and operation with our comprehensive manual, available for free download at manualshive.com. Simply click, download, and unlock the full potential of your Quantum DLT 4000.

Share
Download
background image

Table of Contents

x

Quantum DLT 4000 Tape Drive

5.10 MODE SENSE (6) / (10) Command  (1Ah / 5Ah)....................................... 5-95

5.10.1 MODE SENSE Data Headers......................................................... 5-98
5.10.2 MODE SENSE Block Descriptors....................................................5-100
5.10.3 MODE SENSE Mode Pages...........................................................5-102

5.11 PREVENT / ALLOW MEDIUM REMOVAL Command (1Eh)..........................5-119
5.12 READ Command (08h)...........................................................................5-121
5.13 READ BLOCK LIMITS Command (05h) .....................................................5-125
5.14 READ BUFFER Command  (3Ch)..............................................................5-127

5.14.1 Combined Header and Data Mode ..............................................5-128
5.14.2 Data Mode  ................................................................................5-129
5.14.3 Descriptor Mode ........................................................................5-129

5.15 READ POSITION Command (34h)............................................................5-131
5.16 RECEIVE DIAGNOSTIC RESULTS Command (1Ch)......................................5-135
5.17 RELEASE UNIT Command (17h)..............................................................5-137
5.18 REPORT LUNS Command (0Ah).............................................................. 5-139
5.19 REQUEST SENSE Command (03h)...........................................................5-141
5.20 RESERVE UNIT Command  (16h).............................................................5-151
5.21 REWIND Command (01h).......................................................................5-153
5.22 SEND DIAGNOSTIC Command (1Dh).......................................................5-155
5.23 SPACE Command  (11h)........................................................................5-161
5.24 TEST UNIT READY Command (00h).........................................................5-163
5.25 VERIFY Command (13h).........................................................................5-165
5.26 WRITE Command (0Ah).........................................................................5-167
5.27 WRITE BUFFER Command (3Bh)..............................................................5-169

5.27.1 Write Combined Header and Data Mode (000b) ...........................5-170
5.27.2 Write Data Mode (010b)..............................................................5-170
5.27.3 Download Microcode Mode (100b)..............................................5-171
5.27.4 Download Microcode and Save Mode (101b) ...............................5-171

5.28 WRITE FILEMARKS Command  (10h) .......................................................5-173

Appendix A: Definition of Vendor Unique Sense Data Information ...................................................... A-1
Appendix B: EEPROM-Resident Bugcheck and Event Logs ....................................................................   B-1

B.1 EEPROM Packets (Last n Events)........................................................................................ B-1
B.2 Bugcheck Packets................................................................................................................ B-1

B.2.1

POST Failure Packets............................................................................................... B-2

B.2.2

Event Log Packets................................................................................................... B-3

Appendix C: Updating the Firmware.......................................................................................................... C-1

C.1 Overview .............................................................................................................................. C-1
C.2 Creating a Firmware Update Tape .................................................................................... C-1
C.3 Firmware Update Procedure.............................................................................................. C-2
C.4 Interpreting the Results of a Firmware Update ............................................................... C-4

Appendix D: The Tape Cartridge  ................................................................................................................ D-1

D.1 Tape Cartridge Handling Guidelines ................................................................................ D-1
D.2 Tape Cartridge Inspection Procedure................................................................................ D-4

Summary of Contents for DLTtape DLT 4000













































































































































































































































































































Reviews:

No comments

Related manuals for DLTtape DLT 4000

Acard ARS-2018 User Manual preview
ARS-2018
Brand: Acard Pages: 54
Kingston Technology DTR30G2 Specifications preview
DTR30G2
Brand: Kingston Technology Pages: 2
Zhejiang Longyard Trade Industrial BS-T1B Owner'S Manual preview
BS-T1B
Brand: Zhejiang Longyard Trade Industrial Pages: 18
Dancover PR97060 Manual preview
PR97060
Brand: Dancover Pages: 66
NORBAIN VAIDe User Manual preview
VAIDe
Brand: NORBAIN Pages: 11
NEC Storage ST1220 User Manual preview
Storage ST1220
Brand: NEC Pages: 69
G-Technology G-DRIVE with Thunderbolt Product Manual preview
G-DRIVE with Thunderbolt
Brand: G-Technology Pages: 34
G-Technology G-Mini Product Manual preview
G-Mini
Brand: G-Technology Pages: 34
Konica Minolta HD-505 Installation Manual preview
HD-505
Brand: Konica Minolta Pages: 3
Seagate Constellation CS Datasheet preview
Constellation CS
Brand: Seagate Pages: 2
QNAP TS-1273U Quick Installation Manual preview
TS-1273U
Brand: QNAP Pages: 20
Western Digital Caviar WD1601ABYS Specifications preview
Caviar WD1601ABYS
Brand: Western Digital Pages: 2
Tektronix 372 User Manual preview
372
Brand: Tektronix Pages: 364
HomePlace Cedar Garden Building Assembly Manual preview
Cedar Garden Building
Brand: HomePlace Pages: 56
Freecom HARD DRIVE Sq Overview preview
HARD DRIVE Sq
Brand: Freecom Pages: 3
Sonnet PICCOLO User Manual preview
PICCOLO
Brand: Sonnet Pages: 2
Sonnet Tempo SSD Pro Plus Quick Start Manual preview
Tempo SSD Pro Plus
Brand: Sonnet Pages: 8
Seagate Barracuda 18FC ST118273FC Product Manual preview
Barracuda 18FC ST118273FC
Brand: Seagate Pages: 76

Brands by name

Popular brands

Load more brands