![background image](http://html1.mh-extra.com/html/quantum/dlttape-dlt-4000/dlttape-dlt-4000_product-manual_3688580229.webp)
SCSI Commands
Quantum DLT 4000 Tape Drive
5-129
RECEIVE DIAGNOSTIC RESULTS Command (1Ch) (continued)
The following data is returned by the drive as a result of the RECEIVE
DIAGNOSTIC command. Note that a REQUEST SENSE command should be
used to obtain more detailed information following a CHECK CONDITION on a
SEND DIAGNOSTIC command.
Bit
Byte
7
6
5
4
3
2
1
0
0
Controller Present Flag
1
Controller Error Flag
2
Drive Present Flag
3
Drive Error Flag
4
Media Loader Present Flag
5
Media Loader Error Flag
Flag set = 1 = failure. Flag not set = 0 = not present or no error
Figure 5–65 RECEIVE DIAGNOSTIC RESULTS - Data Format
This information indicates which of the main components of the tape drive
subsystem may have failed diagnostic testing.
Summary of Contents for DLTtape DLT 4000
