![background image](http://html2.mh-extra.com/html/quantum/dlt-s4/dlt-s4_reference-manual_3531879133.webp)
Chapter 4 SCSI Commands
MODE SELECT (6) / (10) Command (15h / 55h)
DLT-S4 Interface Reference Guide
99
Except for the EEPROM Vendor-Specific Page (page 3Eh), the drive
always powers on with its default configurations set. The drive sets the
mode parameters to their default setting following the processing of a
TARGET RESET
or
LOGICAL UNIT RESET
task management function (see
TARGET RESET
on page 7 or
LOGICAL UNIT RESET
on page 7).
Figure 49
MODE SELECT
(6)
Command Descriptor Block —
Data Format
Note:
See
Changeable Parameters Within
MODE SELECT
on
page 156 for a list of changeable parameters within
MODE
SELECT
(see
EEPROM Mode Page (3Eh)
on page 207 for
additional information about how to use these changeable
parameters).
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation Code (15h)
1
Reserved
PF
Reserved
SP (0)
2 — 3
Reserved
4
Parameter List Length
5
Control