![background image](http://html2.mh-extra.com/html/quantum/dlt-s4/dlt-s4_reference-manual_3531879374.webp)
Chapter 4 SCSI Commands
WRITE ATTRIBUTE Command (8Dh)
DLT-S4 Interface Reference Guide
340
• If the attribute is Read / Write, the attribute is deleted. The attribute
is not returned in response to a
READ ATTRIBUTE
command and not
reported by the
READ ATTRIBUTE
command with the
ATTRIBUTE LIST
service action.
• If the attribute does not exist, the attribute in the
WRITE ATTRIBUTE
command parameter list is ignored; this is not considered an error.
If either of the following conditions occurs, no attributes are changed, the
WRITE ATTRIBUTE
command terminates with a
CHECK CONDITION
status,
the Sense Key is set to
ILLEGAL REQUEST
, and the Additional Sense Code
is set to
INVALID FIELD IN PARAMETER LIST
:
• The parameter data attempts to change a read-only attribute.
• The parameter data contains an attribute with incorrect contents in
the Attribute Length field (see
Attribute Format
on page 242).