Quantum ATL SuperLoader ATL, User Manual

Page: 69 / 196

Chapter 3 Media Changer Commands
Log Sense Command (4Dh)
Quantum ATL SuperLoader Software Interface Guide 51
Figure 20 Format for
Last n Error Events
Log Sense
Table 18 Parameters
Last n Error Events
Log Sense
Bit
Byte
7 6 5 4 3 2 1 0
0 -1
(MSB)
Parameter Code
(LSB)
2
DU DS TSD ETC TMC Rsv’d LP
3
Parameter Length
4 - n
(MSB)
ASCII String for Event n
(LSB)
Field Name Description
Parameter Code The Parameter Code value represents the relative
time at which the error occurred. It identifies the
log parameter being transferred for that log page.
Only the most recent 10 events are reported in the
SuperLoader LTO and 5 events for the
SuperLoader DLT..
DU Disable Update. Not supported, always 0.
DS Disable Save. Not supported, always 1.
TSD Target Save Disable. Not supported, always 1.
ETC Enable Threshold Comparison. Not supported,
always 0.
TMC Threshold Met Criteria. Not supported, always 0.