Chapter 3 Media Changer Commands
Release Element (10) Command (57h)
142
Quantum ATL SuperLoader Software Interface Guide
If the LongID bit = 1 and the Element bit = 0, then the parameter
list length is eight and the parameter list has the following format.
Figure 72 Release
(10) ID Only
Parameter List
Parameter
List Length
The contents of this field specify the length, in bytes,
of the parameter list that will be transferred from the
initiator to the target.
NOTE:
Assuming that the RELEASE Command Descriptor Block is
valid, the SuperLoader always returns a GOOD status for this
command. An actual release only happens if the initiator has the unit
reserved for itself or a third-party initiator.
Bit
Byte
7
6
5
4
3
2
1
0
0 - 7
(MSB)
Third Party Device ID
(LSB)
Field Name
Description
Summary of Contents for ATL SuperLoader ATL
Page 1: ...ATL SuperLoader DLT and ATL SuperLoader LTO Software Interface Guide 81 60220 01 A02...
Page 18: ...Preface Document Conventions xviii Quantum ATL SuperLoader Software Interface Guide...
Page 44: ...Chapter 2 Messages Supported SCSI Messages 26 Quantum ATL SuperLoader Software Interface Guide...
Page 196: ...Index 178 Quantum ATL SuperLoader Software Interface Guide...
