Quantum ATL SuperLoader ATL User Manual Download Page 45

Page: 45 / 196

Quantum ATL SuperLoader Software Interface Guide

Chapter 3

Media Changer Commands

This chapter describes the Media Changer SCSI protocol features

implemented by the Media Changer device of the SuperLoader

system. Note that the sections included in this chapter do not fully

reiterate every ANSI SCSI option and/or command code

specification; the sections do describe the supported commands

and options.

Overview of Command and Status Processing

The SCSI feature set has been described as “SCSI-2 plus.” This

means the SuperLoader supports:
• All of the mandatory features of SCSI-2
• Many of the optional features of SCSI-2
• Some of the mandatory and optional features of SCSI-3

Summary of Contents for ATL SuperLoader ATL





































































































































































































Search results

Summary of Contents for ATL SuperLoader ATL

Reviews:

Related manuals for ATL SuperLoader ATL

Brands by name

Popular brands

Quantum ATL SuperLoader ATL, User Manual

Search results

Summary of Contents for ATL SuperLoader ATL

Reviews:

Related manuals for ATL SuperLoader ATL

Brands by name

Popular brands