![background image](http://html1.mh-extra.com/html/quantum/atl-superloader-atl/atl-superloader-atl_user-manual_770480080.webp)
Chapter 3 Media Changer Commands
Log Sense Command (4Dh)
62
Quantum ATL SuperLoader Software Interface Guide
Device Status Page
(3Eh)
3
The Device Status Page describes the current status of the media
changer.
Figure 28 Device
Status Log Sense
Header
Media ID
SDLT/DLT only: Internal media identifier being used when check condition
occurred. 0 = no media or unknown media when event occurred. Note that
this is not an applicable means of tracing media.
Source
Element/
Destination
Element
LTO only: These fields report the element addresses that were involved in the
failure. These fields will be zero (0) if the failure did not involve a move
command.
Bit
Byte
7
6
5
4
3
2
1
0
0
Reserved
Page Code (3Eh)
1
Reserved
2 - 3
(MSB)
Page Length
(LSB)
Field Name
Description
Summary of Contents for ATL SuperLoader ATL
Page 1: ...ATL SuperLoader DLT and ATL SuperLoader LTO Software Interface Guide 81 60220 01 A02...
Page 18: ...Preface Document Conventions xviii Quantum ATL SuperLoader Software Interface Guide...
Page 44: ...Chapter 2 Messages Supported SCSI Messages 26 Quantum ATL SuperLoader Software Interface Guide...
Page 196: ...Index 178 Quantum ATL SuperLoader Software Interface Guide...