Quantum ATL SuperLoader ATL, User Manual

Page: 108 / 196

Chapter 3 Media Changer Commands
Move Medium Command (A5h)
90 Quantum ATL SuperLoader Software Interface Guide
If the Source Address element is empty, the target shall return
CHECK CONDITION status. The sense key shall be ILLEGAL
REQUEST and the additional sense code Medium Source Element
Empty. If the Destination Address element is full, and different
from the Source Address element, the target shall return CHECK
CONDITION status. The sense key shall be ILLEGAL REQUEST
and the additional sense code Medium Destination Element Full.
Table 39 Move
Medium Command
The device capabilities MODE SENSE page provides a matrix with
the supported source element or destination element combinations
for the MOVE MEDIUM command.
Field Name Description
Medium
Transport
Address
Must be set to 0. Specifies the medium transport
element that is to be used in executing this
command.
Source Address
Destination
Address
These fields can be any valid element address. If
it is not valid, the media changer shall return
CHECK CONDITION status. The sense key shall
be ILLEGAL REQUEST and the additional sense
code INVALID ELEMENT ADDRESS.
INV Must be set to 0. Inverting and rotating are not
supported.