ACL 4/52 Software Interface Guide
Document 6211225-03
Version 3.0
2-12
Configuration Procedures
Configuration Procedures
The library can be configured using either the EIA/TIA-574 (DIAG)
interface (refer to Document 6211224, ACL 4/52 Diagnostic Software
User’s Manual) or through the Control Panel Menu Mode (refer to
Document 6211222, ACL 4/52 Operator’s Guide).
“DIAG” Interface
The following configuration functions are available using the
Diagnostic Software Program via the “
DIAG
” port:
•
Horizontal, vertical and extension positions of the data transfer
elements of the: FSA, load port and tape drives
•
Set SCSI address of the: library and tape drives
•
Set power-up state (on-line/off-line)
•
Enable/Disable the Auto Clean option
•
Enable/Disable the Auto Load option
•
Select the language to be displayed in the Status Display Area
(English/Francais/Deutsch/Espanol/Italiano)
•
Initialize Inventory
•
Initialize non-volatile RAM
•
Enable/Disable Recovery
•
Report Recovery status
•
Enable/Disable the Tape Drive Cleaning feature
•
Initialize Auto Cleaning default values
•
Report the Tape Drive Cleaning status
•
Download firmware revisions