511010 Rev. 07-01-19
Field–Replaceable Units (FRUs)
7-21
6.
The front hand holds must be installed on the library before it can be slid all the
way out of the rack. Please contact Qualstar Technical Support for a replace-
ment set if the front hand holds that originally shipped with the RLS cannot be
located. Use a Number 2 Phillips screwdriver to install the two screws that se-
cure the hand holds to the left and right sides of the RLS.
Figure 7-16 Installing the Front Hand Holds on the Library
Front
Hand Hold
Install these 2 Screws to
secure a Hand Hold
Summary of Contents for RLS-8350
